It consists of an aluminum alloy with silicon and magnesium as the main alloying elements, which increases strength. 6063-T5 is most popular for T-slot aluminum extrusion as it has the best extrusion properties everywhere. It can also refer to the T-slot aluminum frame as an 80/20 frame.
As you can see, the slot in t 80/20, which is called a 1010 bar (a 1″ x 1″ beam), will bend 1/10″ when 46 lbs are applied. in the middle of a 36″ long rod, while both ends are supported. The same table designed with the 2020 series (2″ x 2″) could hold up to 2,304 pounds at the edges. Mk North America offers more than 200 different profile shapes and more than 2,700 connectors and system components made of extruded aluminum with T-groove. Because frames are easy to add or change, and components are reusable, cost savings can be achieved. From material costs to time savings compared to building welded steel solutions, the cost savings and efficiency offered to employees at these stations are outstanding.
Instead, place one extrusion on top of another, as shown below. The force is transferred directly from horizontal extrusion to vertical extrusion and increases resistance. Calculate the maximum allowable buckling load according to the Euler formula for critical loads. First, determine what final conditions suit your scenario based on the types of joints. Next, use the column length factor and moment of inertia of the selected extrusion profile surface to calculate the maximum load capacity.
The main alloying elements for this alloy include Mg 0.45%-9% and Si.20%-6%. • A drop lock allows the T-slot of the aluminum extrusion to extend T-Slot Aluminum to the mounting surface of the clutch and practically act as a washer. It was only used for light applications such as machine protection.
This is an example of a machine protection used in an OEM application. This machine protection has a separate access point for the control panel of the equipment. MK aluminum frame systems have more than 200 different profile shapes and more than 2,700 connectors and system components. A machine that works well should also look good in the workplace. The aluminum is shiny, eye-catching and looks great, while providing a solid and reliable solution for your protection and other project requirements. Great company, I ordered a few test extrusions, it turned out very well and now I keep ordering them.
When comparing the two alloys, the cost of steel compared to aluminum is one of the most important factors in determining which materials to use for a work. Affordable tooling costs make the development of a custom aluminum extrusion mold or aluminum profile surprisingly economical. Did we mention that T-groove aluminum profiles are also cheaper than welded steel? Framing Tech is proud to offer T-groove aluminum profiles in the following metric sizes. Although it may seem complicated, the concept behind the aluminum T-slot is very simple. This allows you to combine other aluminum parts without welding.